8 cords / Flat structure
Eight-strand flat braid
An eight-cord flat braid worked on a round disk. Choose two contrasting colors or make each cord different.
Customize this patternMatch these starting cord positions, then follow the move guide in the studio.
Gather your materials
- 8 cords of similar thickness, in colors you can distinguish.
- A round 32-position kumihimo disk with clearly marked positions.
- A way to hold the starting knot, and scissors for finishing.
- Enough spare cord for a practice sample and your chosen finishing method.
Required cord length varies with material, tension and how you finish the ends. Make and measure a short sample before cutting for a finished project.
Keep the setup with the sequence
Match each cord label to its starting position. In the studio, the current move names the position to move from and the position to move to. Work one move at a time, then advance the guide.
If you pause, save the project and leave the cords in their current positions. When you return, compare the setup diagram with your plate before continuing.
Starting setup and moves
Begin with the cord positions shown above. Work through this sequence, then repeat it. Keep your plate or disk aligned with the orientation in the guide.
- Move 31/32 to 9/10. Move cord 1 from gap between 31 and 32 to gap between 9 and 10, which should be empty. Keep the other cords in place.
- Move 32/1 to 22/23. Move cord 2 from gap between 32 and 1 to gap between 22 and 23, which should be empty. Keep the other cords in place.
- Move 16/17 to 6/7. Move cord 6 from gap between 16 and 17 to gap between 6 and 7, which should be empty. Keep the other cords in place.
- Move 15/16 to 25/26. Move cord 5 from gap between 15 and 16 to gap between 25 and 26, which should be empty. Keep the other cords in place.
- Move 7/8 to 15/16. Move cord 3 from gap between 7 and 8 to gap between 15 and 16, which should be empty. Keep the other cords in place.
- Move 24/25 to 16/17. Move cord 8 from gap between 24 and 25 to gap between 16 and 17, which should be empty. Keep the other cords in place.
- Move 8/9 to 32/1. Move cord 4 from gap between 8 and 9 to gap between 32 and 1, which should be empty. Keep the other cords in place.
- Move 23/24 to 31/32. Move cord 7 from gap between 23 and 24 to gap between 31 and 32, which should be empty. Keep the other cords in place.
- Move 6/7 to 7/8. Move cord 6 from gap between 6 and 7 to gap between 7 and 8, which should be empty. Keep the other cords in place.
- Move 9/10 to 8/9. Move cord 1 from gap between 9 and 10 to gap between 8 and 9, which should be empty. Keep the other cords in place.
- Move 25/26 to 24/25. Move cord 5 from gap between 25 and 26 to gap between 24 and 25, which should be empty. Keep the other cords in place.
- Move 22/23 to 23/24. Move cord 2 from gap between 22 and 23 to gap between 23 and 24, which should be empty. Keep the other cords in place.
Instruction references: Jewels in Fiber — 8 Strand Flat Kumihimo Braid
Finish with a sample
Before committing your full project length, check the sample’s width, both faces and tension. Secure the working ends before removing the braid from the plate or disk.