10 cords / Flat structure

Ten-strand flat braid

A ten-cord flat pattern worked on a square plate. Start with its exact setup and explore each cord’s color.

Customize this pattern

Match these starting cord positions, then follow the move guide in the studio.

10-strand flat braid: starting cord positionsMove cord 3 from slot 5 to lowercase e on the right edge, which should be empty. Keep the other cords in place. Cord numbers identify each strand independently of its color.123142536475869101112131471581691710181920EeCord layout · numbers identify individual cords
Starting cord positions

Gather your materials

  • 10 cords of similar thickness, in colors you can distinguish.
  • A square kumihimo plate with clearly marked positions.
  • A way to hold the starting knot, and scissors for finishing.
  • Enough spare cord for a practice sample and your chosen finishing method.

Required cord length varies with material, tension and how you finish the ends. Make and measure a short sample before cutting for a finished project.

Keep the setup with the sequence

Match each cord label to its starting position. In the studio, the current move names the position to move from and the position to move to. Work one move at a time, then advance the guide.

If you pause, save the project and leave the cords in their current positions. When you return, compare the setup diagram with your plate before continuing.

Starting setup and moves

10-strand flat braid: starting cord positionsMove cord 3 from slot 5 to lowercase e on the right edge, which should be empty. Keep the other cords in place. Cord numbers identify each strand independently of its color.123142536475869101112131471581691710181920EeCord layout · numbers identify individual cords

Begin with the cord positions shown above. Work through this sequence, then repeat it. Keep your plate or disk aligned with the orientation in the guide.

  1. Move 5 to e. Move cord 3 from slot 5 to lowercase e on the right edge, which should be empty. Keep the other cords in place.
  2. Move 6 to E. Move cord 4 from slot 6 to uppercase E on the left edge, which should be empty. Keep the other cords in place.
  3. Move 15 to 5. Move cord 8 from slot 15 to slot 5, which should be empty. Keep the other cords in place.
  4. Move 4 to 15. Move cord 2 from slot 4 to slot 15, which should be empty. Keep the other cords in place.
  5. Move 14 to 4. Move cord 7 from slot 14 to slot 4, which should be empty. Keep the other cords in place.
  6. Move 3 to 14. Move cord 1 from slot 3 to slot 14, which should be empty. Keep the other cords in place.
  7. Move 16 to 6. Move cord 9 from slot 16 to slot 6, which should be empty. Keep the other cords in place.
  8. Move 7 to 16. Move cord 5 from slot 7 to slot 16, which should be empty. Keep the other cords in place.
  9. Move 17 to 7. Move cord 10 from slot 17 to slot 7, which should be empty. Keep the other cords in place.
  10. Move 8 to 17. Move cord 6 from slot 8 to slot 17, which should be empty. Keep the other cords in place.
  11. Move e to 8. Move cord 3 from lowercase e on the right edge to slot 8, which should be empty. Keep the other cords in place.
  12. Move E to 3. Move cord 4 from uppercase E on the left edge to slot 3, which should be empty. Keep the other cords in place.

Instruction references: Artbeads — Flat Kumihimo Braid

Finish with a sample

Before committing your full project length, check the sample’s width, both faces and tension. Secure the working ends before removing the braid from the plate or disk.